SERVO TESTER Circuit
This circuit can be used to
manually turn a servo clockwise and anti-clockwise. By pushing
the forward or reverse button for a short period of time you can
control the rotation of the servo. It will also test a servo.
Here is a photo of a kit from
Cana Kit for $10.00 plus
postage (it is a slightly different circuit) and a motor and
gearbox, commonly called a "servo." The output shaft has a disk or
wheel containing holes. A linkage or push-rod is fitted to a hole
and when the disk rotates, the shaft is pushed and pulled. The shaft
only rotates about 180° to actuate flaps or ailerons etc.
A
pot can be used to control the position of the servo by using the
following circuit. It produces a positive pulse
between about 0.9 milliseconds and 2.1 milliseconds. The off period
between pulses is about 40 milliseconds. This can be shortened by
reducing the value of the 3M3 resistor.
View All Circuits
